Need a custom, application-specific wave spring? Smalley engineers offer free design consultations and have designed thousands of custom springs across nearly every industry.

Use the form below to submit your requirements, modify a standard spring, or design your own. Our engineers will review your design for manufacturability and application feasibility.

You can submit the form at any stage by selecting "Send to Smalley Engineering." Our experts will review your request and follow up with you.

Need to talk with an engineer right away? After submitting the form, you'll be directed to a confirmation page with multiple ways to connect directly with a Smalley engineer to discuss your requirements.

Custom Parameters

Wave spring top view, labeled with operates in bore diameter, clears shaft diameter and radial wall.
Top view
Wave spring side view, labeled with free height, load at work height, turns, multi-wave and wire thickness.
Side view
Units
Shim ends are not required. Contact Smalley Engineering with questions.
Enter bore or outside diameter based on the Pilots On selection.

Unable to calculate material properties.

For manufacturability, non-CTC springs require whole numbers.
This field is capped at 40 turns. For additional turns, please contact Smalley Engineering Support.
Optional - enter to see design suggestions.
Minimum value 2x solid height.
Required load at work height 1.
Optional - enter for cycle life calculation.
Reset